Understanding the Linearity of a Calibration Plot

The essence of a calibration plot is the linear relation between two variables. How do you decide the degree of linearity to rely on interpretations based on the calibration plot. The points on a calibration line will seldom fall on a perfect straight line. Normally you would use your ruler to draw a straight line which passes through most of the points.

Our earlier article Guidelines on generation and interpretation of calibration plots dealt with considerations for establishing reliability of calibration. It also dealt with common mistakes that should be avoided in generation and interpolation or extrapolation of the calibration plots.

Two measures of expressing linearity of relationship between two variables are :

Correlation analysis – which applies to two independent factors X and Y i.e if X increases does Y also increase, decreases or does not change at all, and

Regression analysis – a change in X will have a corresponding change in Y but change in Y will not have change in X.

In a calibration plot where all points do not fall in a straight line the linear regression is applied. Line of regression minimizes the distance of residuals in the Y direction between the line and the individual points and passes through the centroid (mean values of X and Y) of the data.

regression analysis of linear plot

Regression Analysis of Linear Plot

The linear regression line uses method of least squares to establish the relationship between two variables as the best fit straight-line. Most instruments yield a linear response only over a specific concentration range beyond which the response is nonlinear. Choice of correct region is important to minimize errors due to nonlineraity

Coefficient Correlation, r

Linear coefficient expresses degree of linearity between two variables X and Y. It lies in this range +1 to -1. The positive sign refers to a positive linear relationship between the two variables and negative sign refers to a negative relationship between the variables.

r value close to 1 indicates a strong positive relationship that is an increase in value of X is accompanied by a corresponding increase in Y.

r value close to -1 indicates a strong negative correlation that is an increase in value of X is accompanied by a corresponding decrease in value of Y.

r = 0 indicates that there is no relation between the two variables.

r = -1 indicates perfect negative relation between the variables.

Coefficient of Variance, r^2

Often instead of r the coefficient of variance r^2 is used. It indicates the percentage of variation in Y associated with variation in X

r^2 lies between 0 and 1

For example if r= 0.98 then r^2 is 0.96 which means that 96% of the total variation in Y can be explained by the linear relationship between X and Y. The remaining 4% of variation in Y remains unexplained

r^2 is a measure of how well the regression line represents the data

Please share your views and leave your comments.

About Dr. Deepak Bhanot

Dr Deepak Bhanot is a seasoned professional having nearly 30 years expertise beginning from sales and product support of analytical instruments. After completing his graduation and post graduation from Delhi University and IIT Delhi he went on to Loughborough University of Technology, UK for doctorate research in analytical chemistry. His mission is to develop training programs on analytical techniques and share his experiences with broad spectrum of users ranging from professionals engaged in analytical development and research as well as young enthusiasts fresh from academics who wish to embark upon a career in analytical industry.

Comments

  1. Shazia Hasnain says:

    Very useful article.

  2. Mulugeta Derebew Damtew says:

    Dr. Deepak Bhanot

    WELL INTERPRETED, THANK YOU..

    Please continue to work on how to easily approach correlated measurement influence factors in the estimation of uncertainty.

  3. Anna Lucas says:

    Thanks sir,
    The article is very important on knowledge development on HPLC

Leave a Reply to Shazia Hasnain Cancel reply

*

Get Free Access to Continuing Education!

Over 17000 scientists read our free weekly newsletter. Don't be left out!


  • Keep learning to keep succeeding
  • Laboratory Tips, Tricks and Troubleshooting
  • Latest News from the laboratory world
  • Practical and applied knowledge
  • Special discounts and promotions on certificate courses