How to prolong the useful life of Ion Exchange Resin Beds?

Water demineralization plant

Water demineralization plant

Ion exchange resins have wide ranging laboratory and industrial applications. Ideally the resins should retain their exchange capacities and efficiencies for extended periods to be cost effective. Fortunately it is possible to regenerate the resin beds at predetermined intervals on the basis of online monitoring of parameters such as electrical conductivity and pH of output streams.

Regeneration involves three basic steps, namely, removal of solid deposits, removal of displaced ions with a concentrated solution of replacement ions and rinsing and flushing the resin bed.

Ion exchange resins suffer from loss in performance due to several reasons. The present article discusses some of the common factors that lead to such performance deterioration and suggests remedial measures.

Fouling of Ion Exchange Resins

Insoluble Sulphates

An acid is commonly used for determining demineralization .Hard water can contain high levels of calcium which can form insoluble precipitate with sulphuric acid. This can lead to scale buildup and blocking of pipelines. In such situations replace the regenerating sulphuric acid with hydrochloric acid.

Iron

Underground supplies of water are mostly polluted with soluble ferrous ions which in contact with oxygen present in air get oxidized to ferric state. In this state it gets precipitated as insoluble ferric hydroxide which can clog the resin beds. It can be removed by introduction of a solution of sodium tripolyphosphate or sodium dithionite.Iron levels should be kept below 0.1 ppm in the feed water.

Organic Contamination

Organic matter is a common cause of water contamination. Such matter can adversely affect the exchange capacity of the resin beds. Such organics are removed prior to demineralization by flocculation with alum and ferric salts. Subsequent filtration removes the metal hydroxide floc and the co-precipitated organic compounds.

Bacteria

Resin beds should not be considered as filter media for bacteria and organics. Traces of organic matter often act as nutrients for bacteria and sustain their growth.This further contributes to the clogging of filter beds. Disinfectants such as peracetic acid and formaldehyde are effective in removal of bacterial contamination.

Dissolved Chlorine

Chlorine treatment becomes necessary to eliminate microbial infections in drinking water. However, chlorine is known to damage resins. Dissolved chlorine is removed by passing chlorinated water through activated charcoal beds.

Resins need to be regenerated when the ions in the resin are fully replaced by ions present in solution. Continuous monitoring of outlet streams can automate initiation of regeneration cycles. Service runs between cycles can range from usually 12 – 48 hours. Carefully maintained resin beds can retain their exchange capacity for months if not years.

About Dr. Deepak Bhanot

Dr Deepak Bhanot is a seasoned professional having nearly 30 years expertise beginning from sales and product support of analytical instruments. After completing his graduation and post graduation from Delhi University and IIT Delhi he went on to Loughborough University of Technology, UK for doctorate research in analytical chemistry. His mission is to develop training programs on analytical techniques and share his experiences with broad spectrum of users ranging from professionals engaged in analytical development and research as well as young enthusiasts fresh from academics who wish to embark upon a career in analytical industry.

Speak Your Mind

*

Get Free and Instant Access to Lifelong Learning!

Lab-Training.Com provides you free ongoing learning on the fundamentals and latest developments in laboratory and analytical sciences. Come be part of our community of 17000 members!

  • Become an expert
  • Tips, Tricks and Troubleshooting
  • Just few minutes a week
  • Latest from the laboratory world
  • Brush up and strengthen your basics
  • Learn new techniques
  • Short and crisp articles