Advantages of direct solid sampling in Atomic Absorption Spectroscopy

Coloured powder test specimens

Coloured powder test specimens

Ever since its introduction as a versatile technique for trace metal analysis Atomic Absorption Spectroscopy has utilized liquid sample introduction as universally accepted mode of sample introduction. This mode supports analysis using both flame and graphite furnace atomization techniques.

Slurry sampling gained popularity with monitoring and control of manufacturing processes. However, it was accompanied with problems arising from clogging of nebulizers. Further the available time for vaporization in the flame is of the order of milliseconds which is insufficient for complete vaporization of larger size solid particles in slurries so graphite furnace atomization offered a viable option.

Introduction of solid samples direct into the Atomic Absorption Spectrometer became a reality towards the beginning of this century and gained acceptance with the availability of a commercial accessory. The automated accessory in conjunction with graphite furnace atomization holds promise over the conventional liquid sample introduction. The advantages offered are briefly covered in the article.

Time Saving

Samples received for analysis often comprise solids such as powders, soils, rocks, aggregates, inorganic salts, etc which after grinding for homogenization require chemical treatment such as solvent extraction and acid digestion which consume time. Introduction of solids directly can help reduce time taken by such processes. Automation affords precise sample introduction into the graphite furnace assembly which results in higher precision and accuracy of results.

Cost Saving

Bulk materials are often non-homogeneous so grinding to a fine powder introduces homogeneity. Afterwards sample pretreatment can require use of expensive solvents and chemicals to prepare the sample in liquid form for further analysis. Direct introduction of the powder can help save on the cost of such reagents and chemicals.

Freedom from harmful and toxic reagents

Use of toxic chemicals and corrosive acids accompanied with heating is not necessary if solid samples are directly introduced into the spectrometer in their original state. Further the risk of contamination of sample during processes such as digestion, weighing, serial dilutions, storage in volumetric glassware or vials prior to analysis is avoided. This eliminates contact or exposure to such harmful materials and protects the environment from discharge of such materials as laboratory wastes.

Freedom from contamination

As sample treatment is not necessary the sample does not get contaminated by impurities present in the laboratory reagents. The sample gets analyzed in its original state and the risk of contamination in sample preparation stages such as digestion, weighing, serial dilutions and during storage and handling is avoided.

Sample size

Availability of limited sample quantities can be a serious concern. In case of solids the problem can be easily overcome as analysis is possible for sample sizes as small as 100 μg to 10mg quantities.

Sensitivity improvements

Sample digestion results in dilution of the available sample. Losses can also result from storage of sample prior to analysis. The overall improvement of sensitivity can be around10 times compared with sample digestion or other sample pre-treatments.

The range of samples covers fine granules, fibers, creams and fine powders with precise sample introduction each time. However, complete homogeneity of sample needs to be ensured before introduction into the system.

About Dr. Deepak Bhanot

Dr Deepak Bhanot is a seasoned professional having nearly 30 years expertise beginning from sales and product support of analytical instruments. After completing his graduation and post graduation from Delhi University and IIT Delhi he went on to Loughborough University of Technology, UK for doctorate research in analytical chemistry. His mission is to develop training programs on analytical techniques and share his experiences with broad spectrum of users ranging from professionals engaged in analytical development and research as well as young enthusiasts fresh from academics who wish to embark upon a career in analytical industry.

Speak Your Mind

*

Get Free Access to Continuing Education!

Over 17000 scientists read our free weekly newsletter. Don't be left out!


  • Keep learning to keep succeeding
  • Laboratory Tips, Tricks and Troubleshooting
  • Latest News from the laboratory world
  • Practical and applied knowledge
  • Special discounts and promotions on certificate courses