Why is physical examination of samples important prior to analysis?

Why is physical examination of samples important prior to analysis?
Sample observation prior to analysis
Sample observation prior to analysis

Analysis results are authentic only if the samples taken for analysis are representative of the whole. A sample represents a bulk quantity such as sea water, river, lake water, rock from a mining site, tissue or body fluid from a living being, raw material consignment or finished product representing a manufactured product. It is necessary to ensure that the sample is homogeneous and representative of the bulk material it represents.

Liquids

  • Samples are collected and stored in clean and sterilized vessel or vial
  • The samples should be homogeneous and there should be no tendency to separate into different layers
  • Samples should be clear and free of suspended matter and there should also be no solid deposits at the bottom of the container

Solids

  • Samples should be in  a fine powder state as lumps or granules represent non- homogeneity in terms of moisture or residual solvents content
  • There should be uniformity of colour of samples as different coloured zones represents compositional variations and require further homogenization before analysis is undertaken
  • Crystalline materials can be analyzed as such but pulverization to a fine powder will lead to higher homogeneity and place higher degree of reliability on results.

A number of common physical observations for all types of samples are:

  • The sample container should not be damaged or leaking
  • Sample details are clearly displayed on the label. Light and heat sensitive materials are adequately protected
  • Sample containers or packets are properly sealed and protected from ingress of air and moisture
  • Samples are stored under specified environmental conditions of temperature and humidity
  • Special handling requirements are complied with when handling materials such as radioactive, biohazardous materials, highly corrosive or poisonous substances
  • Samples stored under low or high temperatures should be allowed to reach room temperature before starting analysis.

It pays to spend a few minutes to examine the samples physically before proceeding with analysis as it adds to your confidence on your results. The suggested guidelines will ensure greater reliability every time you carry out your estimations.

Related Articles

Responses

Your email address will not be published. Required fields are marked *

small_c_popup.png

Dont Get left Out!

over 20,000 scientists read our weekly Newsletter!